Page tree

Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: add corresponding eps observations

...

SoloHI consists of 1 white-light telescope with wide FOV. However, data The image is captured on a mosaic of four 2048x1920 APS detectors that are read out independently. This gives flexibility for image operations: independent exposures, cadences, etc.). Data can be read out either from the whole detector or from well-defined subfields:

...

selected subfields.

Typically, SoloHI images will have one of 3 typical FOVs defined below. These are used in the observing programs/modes currently defined but could be changed in-flight if necessary.

3968 lossless (factor 2.5) - lossy (up to 50) 192 px * 512 px- (1.88ºx5º)-- 
 FOV split (radial x transverse)FOV (radial x transverse)TM/raw imagecompression ratesDownlinked pixelsTypical cadenceComments
SoloHI Full frame image
(40ºx40º)

5º to 45º x 40º (star)

1960 px * 3968 px

5º-45º x 5º-45º (40ºx40º)

info missing

1960 px
(incl. 2x2 bin)

24-36 min (inner FOV)
30-72 min (outer FOV) 

(star) split in 2 or 3 readout frames depending on solar distance,
e.g. 5º to 25º x 40º (inner) + 25º to 45º x 40º (outer) at perihelion,
each with different cadence. Details in table below.

SoloHI inner FOV subframe imageimages
(3 images of 1.88ºx5º) 

5.8º

to 7.68º x 5º


13.5º

to 15.38º x 5º
18.5º

to 20.38º x 5º

  

192 px * 512 px (not binned)
96 px * 256 px (binned 2x2)
96 px * 256 px (binned 2x2)

18-36 sec
36-72 sec
1.5-3.0 min

Subframe images typically only used at and near perihelion (up to 0.36AU)
Radial Swath subframe image

3968 px * 512 px

5º-45º x 5º (40ºx5º)(40ºx5º) 5º to 25º x 5º
25º to 45º x 5º 

1960 px * 256 px 
(incl. 2x2 bin)

6 min (inner FOV)
12 min (outer FOV) 

Radial swath images typically only used at and near perihelion (up to 0.36AU)

 

Observational modes

Main science programs

...

Example of such an orbit plan is below:The details of each observing mode are still to be provided by SoloHI.

Observing modes - Example plan Use case#images / dayScience data volume / daySoloHI data rateObserving duration / orbit 
    (Gbits) estimate(kbits/s)(days) example
Perihelion programs: 0.28-0.29 AU    

SoloHI Solar Wind Turbulence @perih

  12962.2226.53

SoloHI Shock Formation @perihFormation @perih

 

 4682.5430.33
       
Near-Perihelion programs: 0.29-0.36 AU    
SoloHI Near-perihelion Synoptic Program  3481.6920.35
SoloHI Solar Wind Turbulence Near-perihelion  7501.9423.22
SoloHI Shock Formation Near-perihelion  5162.4529.32
       
Far-Perihelion programs: 

0.36-0.42 AU

    
SoloHI Far-Perihelion Synoptic Program  1321.6419.77
       
Southern (star) Out-of-ecliptic programs: 0.5-0.7 AU (star)    
SoloHI Southern Synoptic Program  1040.8410.38

(star) Dependent on the trajectory

...

Examples of more-detailed observing program for 1 type of orbit during the mission (source: 04_130904_SoloHI_CDR_ObsProg.ppt):

Image Added

Based on table above:

  • a typical perihelion programme would produce ~25kbps (during 4 days), -> see modelled observations HI_SHOCK_PER (DATARATE=30300 [bits/sec]), HI_TURB_PER (DATARATE=26500 [bits/sec]), 
  • near-perihelion SoloHI would produce ~20kbps (during 8 days) , -> see modelled observation HI_SYN_PER (DATARATE=20300 [bits/sec])
  • ~18.5kbps even further out (during 12 days) and -> see modelled observations HI_SYN_NEAR (DATARATE=19700 [bits/sec])
  • in the far-out RSwindow, a datarate around 10 kbps would be reached. -> see modelled observations HI_SYN_FAR (DATARATE=10300 [bits/sec])

(see also SoloHI concept study report Dec 2011, needs update! )

How to organize SoloHI observations in coordination with the other instruments, i.e. does SoloHI have 'observing modes' to choose from for each solar distance?, is still to be discussed in more detail. Also, while the schema above may be optimal from a science perspective, the varying downlink rate & SSMM storage limits may impose limitations on when which datarate can be used.